Custom Home Builder in Melbourne, FL
Brightview builds custom homes in Central Florida two ways: we modify one of our eleven plans to fit your lot and your life, or we build from plans you bring us. A modified Brightview plan in Melbourne starts at $270,990 with Brevard County fees included; a full custom set is priced from your drawings after a constructability review.
Brightview builds custom homes in Central Florida two ways: we modify one of our eleven plans to fit your lot and your life, or we build from plans you bring us. A modified Brightview plan in Melbourne starts at $270,990 with Brevard County fees included; a full custom set is priced from your drawings after a constructability review.
What building in Melbourne actually involves
Melbourne is the aerospace and defense wage base — L3Harris, Northrop, Embraer — and beachside access within 15 minutes. Every Melbourne project runs through City of Melbourne Building Department, and the county-level pieces — impact fees of about $1,000 on our smallest plan, plus Brevard County's review of septic, flood and access where it applies — follow Brevard County rules. Coastal county. Barrier-island and near-lagoon parcels sit in the wind-borne-debris region and often in mapped flood zones — we pull the flood determination and wind zone before pricing.
Brightview plan pricing in Brevard County
These are our base plan prices with Brevard County's impact and tap fees already in them — before land, site work and selections. Most builders quote you a base price and hand you the fee bill later; we would rather you see the county's number in the number.
| Plan | Size | Beds / baths | Brevard price from |
|---|---|---|---|
| Cambria | 1,665 sq ft | 4 bd / 2 ba | $270,990 |
| Tribeca | 1,665 sq ft | 3 bd / 2 ba | $270,990 |
| Legacy | 1,805 sq ft | 4 bd / 2 ba | $300,990 |
| Hudson | 1,821 sq ft | 3 bd / 2.5 ba | $300,990 |
| Valencia | 1,920 sq ft | 4 bd / 2.5 ba | $310,990 |
| Brighton | 2,169 sq ft | 4 bd / 2.5 ba | $330,990 |
| Kensington | 2,112 sq ft | 4 bd / 3 ba | $340,990 |
| Belmont | 2,307 sq ft | 4 bd / 3 ba | $370,990 |
| Windsor Modern | 2,400 sq ft | 4 bd / 3 ba | $390,990 |
| Astoria | 2,551 sq ft | 4 bd / 3.5 ba | $410,990 |
| Wellington Estate | 3,479 sq ft | 4 bd / 3.5 ba | $560,990 |
Why Melbourne owners build with us
- Start from a proven plan and modify it — the fastest, least expensive path to a genuinely custom house.
- Or bring your own architect's drawings and we'll build them, with a real constructability review first.
- Structural changes, ceiling treatments, kitchen reconfigurations, in-law suites and 3-car garages are all on the table.
- You see the actual cost of every change before you approve it — our change orders are priced, not estimated.
- The same fixed-price discipline as our production plans, applied to a one-off house.
How a Melbourne build runs, start to finish
Talk through the house
What you want, what the lot allows and what the budget really supports — in that order.
Plan path
Modify a Brightview plan, or price your architect's set. We'll tell you which one gets you there for less.
Priced selections and allowances
Every upgrade carries a real number before it goes in the contract.
Permits and engineering
Structural, energy and truss engineering, then the permit through your jurisdiction.
Build with scheduled walkthroughs
Pre-drywall and final walkthroughs, a punch process, and a warranty at the end.
Everything Brightview builds in Melbourne
Straight answers
Does Brightview build custom homes in Melbourne?+
Yes. In Melbourne we build custom two ways: we modify one of our eleven floor plans to fit your lot and your life, or we build from plans you bring us after a constructability review. Brightview Homes is a licensed Florida general contractor (CRC1334100) building across eight Central Florida counties. Call (407) 543-1739.
How much does a custom home cost in Melbourne?+
Custom work in Brevard County starts from our plan pricing — $270,990 to $560,990 with county fees included — and moves from there based on the changes. Structural modifications, ceiling treatments and kitchen reconfigurations all carry a real priced number before they enter the contract.
Can I bring my own architect's plans to build in Melbourne?+
Yes. We'll review them for constructability and Florida Building Code compliance, price them honestly, and tell you where a small change saves real money. If your plan set needs structural, truss or energy engineering to permit, we coordinate it.
What's the difference between custom and semi-custom in Melbourne?+
Semi-custom means starting from a proven plan and modifying it — far faster and cheaper, because the engineering already exists. Full custom means designing from scratch. Most buyers who say 'custom' actually want semi-custom, and we'll say so if that's what fits your budget.
How long does a custom build take in Melbourne?+
Design and engineering typically run 2–4 months, permitting through City of Melbourne Building Department another 6–12 weeks, and construction 8–11 months for a custom house. A modified stock plan is faster on all three.
Do you build in-law suites, 3-car garages and bonus rooms in Melbourne?+
Yes — those three are the most common modifications we do. In-law suites in particular are worth designing at the start rather than adding later, because the plumbing and structural runs are much cheaper before the slab is poured.
Talk to a builder, not a call center
Send us an address or a question. We answer with real numbers — what it costs, what your parcel allows, and how long it takes.